Author Avatar



Share post:

Fences give you and your family a sense of security and privacy . They are also strong design elements which define a home’s outside appearance. But fences can be difficult to build and maintain. Wooden fences can look beautiful but require a lot of maintenance. Untreated wood like cedar can be left to turn silver-gray or streaky on its own. This is something some homeowners don’t like. PVC Fencing Jeffrey’s bay Painted fences give your home a neat, trim look yet become difficult to paint as they age out.

Vinyl fences can help. Vinyl fences are attractive, durable, low-maintenance and very attractive. Vinyl fences don’t need to be treated or painted because the vinyl has a color infused within it. They keep their colors consistent from year to year, regardless of the season.

How to build a vinyl fence

Vinyl fences are built on interlocking component systems. When you purchase a vinyl fence, make sure you have all of its components. Otherwise, you will not be able to build the fence as vinyl fences do not allow for improvisation.

Vinyl Picket Fences

PVC Fencing Port Elizabeth Vinyl picket fences start with anchor pipes, which are driven into ground by a saw. Hollow posts slide over the anchor pipes like sleeves. Two anchor pipes are used to create a section of fence panels: one rail on the bottom, one rail on the top and multiple pickets which run through the two rails.

Vinyl privacy fences

Vinyl privacy fences that are taller than six feet must have their posts anchored in the ground with concrete. This is similar to conventional four-by-4 fence posts. These posts cannot slide over an anchor tube; they are directly sunk into the concrete. A fence panel is not made from separate pieces, but it comes pre-built.

Codes and Regulations

You might need to get a permit prior to building your fence. After the work is done, an inspector must inspect the site and close the permit. All work must be built according to local building codes and regulations. Consider legal issues like easements or zoning. Your local permitting department can advise you on local zoning and setback regulations that affect fence construction.

When to build your vinyl fence

If the ground is frozen, it will be difficult for you to drive the anchor pipes for a picket fence or dig the holes for a privacy fence. Be patient and wait until the ground thaws before you start building.

Fence Safety

Your local utility location should be called whenever you dig in your property. This will allow you to find the location of underground services like water, gas, or electrical lines. PVC Fencing East London These services will be marked using color-coded spraypaint that eventually fades.

What you’ll require

Equipment / Tool

  • Shovel or post-hole digger
  • Twine and wood stakes
  • Bubble level
  • Tape measure
  • Sledgehammer
  • Cordless drill
  • Circular saw


  • Vinyl picket or privacy fence set
  • Quick-set concrete
  • Filler gravel
The smart Trick of PVC Fencing George That Nobody is Discussing
Pressure Washer Sandblasting Kit Review

Leave a Comment

Your email address will not be published. Required fields are marked *